Electric internal-mount pipe beveling, facing and chamfering machine with three-jaw self-centering internal clamping. 220 V, 50 Hz; select by pipe inside diameter and model-specific limits.
Apparecchi elettrici di saldatura/saldaturaHS: 851531
Produttore
Circumferential seam TIG welding equipment for rotating workpieces. Workpiece diameter 50-400 mm, length up to 600 mm, weight up to 200 kg; wall thickness 3-20 mm, subject to actual joint, material and procedure confirmation. Three-phase AC 380 V +/-10%, 50/60 Hz; power-source output 4-400 A with rated duty cycle 60%. Water-cooled JJT400 TIG torch; wire diameters 1.0/1.2 mm. Stores 200 recipe groups with four intervals per group; no USB data export. Standard factory dispatch: 10-20 WOR
Apparecchi elettrici di saldatura/saldaturaHS: 851531
Produttore
Track-type automatic all-position pipe girth welding system using MIG/MAG/FCAW processes. Current designation FXM-G219 (G219), paired with the FXM50 Pro power source. Pipe outside diameter from 219 mm; wall thickness 5–100 mm, with welding procedure and configuration confirmed for the actual joint. Power-source current range 10–500 A, three-phase 400 V with -15% to +20% input tolerance, 50/60 Hz. Rated duty cycle 500 A at 60% and 390 A at 100%. Process recipes can be stored and recalle
Apparecchi elettrici di saldatura/saldaturaHS: 851531
Produttore
Pulsed TIG system for welding stainless-steel heat-exchanger U-tubes to straight tubes. Current head models: U12/U16/U21/U25, covering tube outside diameters of 12.7 mm / 12.7–16 mm / 16–21 mm / 20–25 mm respectively. Socket combined wall thickness must not exceed 1.6 mm; butt-joint wall thickness must not exceed 1.6 mm. Minimum centre distances are 38/38/54/60 mm for U12/U16/U21/U25 respectively; clearance radius and tube straight-length requirements are checked separately. Single-pha
Apparecchi elettrici di saldatura/saldaturaHS: 851531
Produttore
PT40 is paired with the FXT20 power source for autogenous TIG welding of flush tube ends to tubesheets. Tube diameter 10–38 mm and wall thickness 0.5–2 mm. The PT40 head comes standard with water cooling; the FXT20 power source is air-cooled. Single-phase 220 V ±10%, 50/60 Hz, power-source output 5–200 A. PT40 does not use filler wire or AVC and is not for protruding tube ends. Head suspension or a support bracket is selected according to the workpiece and tube size. Suitable for heat-
Apparecchi elettrici di saldatura/saldaturaHS: 851531
Produttore
Standard C5/C10/C40/C80/C120/C170 heads cover tube outside diameters from 6.35 to 168 mm depending on the selected head. Wall-thickness limits depend on the head: C5 0.5–1.5 mm, C10 0.5–2.0 mm, C40 0.5–2.5 mm, and C80/C120/C170 0.5–3.0 mm. The FXT20 power source uses single-phase 220 V ±10%, 50/60 Hz, with 5–200 A output. The power source is air-cooled; C5 is air-cooled, while C10/C40/C80/C120/C170 use water cooling. Parameter printing and USB data export are standard power-source capa
Apparecchi elettrici di saldatura/saldaturaHS: 851531
Produttore
White 380V FXT40 Pro orbital TIG pipe welding system. Welding current 10–400A. Equipment and welding heads selected to suit pipe dimensions and application.
